Son Set Beach NEW 4x12 Orange Speaker Cab 412 Awesome! Unloaded Use your Speaker

New b-e-a-utiful NEW Orange Style 4x12 Speaker Cab. YES One Four 12 Cab - Just Perfect Really! In 2001 I was recording in the studio and I noticed that my vintage Marshall cabs were what I normally went to use. I was thinking that these 4x12 speaker cabinets were impossible to find in good condition. Then it happened, I found a true craftsman through a stroke of fate that has the very best experience in speaker cabinet building.

We became partners and Son Set Beach Music speaker cabinet division was off and running. I thought for a long time about this 4x12 and here it is.

It has the great tone of a 4x12 and less weight, like a 3x12. On this 4x12 I can Make either Slanted 4x12 or the Straight 4x12 - Just Please advise! More Wattage and More tone - For Less. The Color Vinyl and Grill Cloth of You Choose!

- ALSO check for our. (See the pictures above and Left). These Speaker Cabinets are USA made, and we like that greatly! 100% AMERICAN PRODUCT MADE FROM. THE DIMENSIONS ARE 27 1/2" Wide x 29" High x 14 Deep.

ASSEMBLED WITH DADO JOINTS "Reinforced" TO REALLY GET A HIGH QUALITY SOUND AND PERFORMANCE. IT IS WRAPPED IN Pristine BRONCO VINYL , METAL BLACK CORNERS. LARGE RUBBER FEET - STEEL HANDLES. We Finally started making some Speaker Cabinets for our Clients and Ourselves.

We found a few Great USA Speaker Cabinet Makers and we Put our heads together to come up with a few great ideas. Contact me at: sonsetbeach - Ask for Bob. I have been using these in my Son Set Beach 4x12 Cab and the Engineers love them Mucho. And FOR THOSE who want a Two 15 Cab - Say no more!

Use these for our Very New 2x15 Son Set Beach Cab. Slanted or Straight - Thats Right.. It responds to overdrive distortion with a gritty edge. We build Pro-Tour guitar/bass speaker cabinets that generated World Class TONE and Beyond. Our Cabs are built for the Players who demand ultimate performance.

The common complaints of "muddiness" "low dynamics" and "poor projection" that we've all experienced at one time or another. Here are some Vinyl and Grill Cloth C o l o r Choices. Orange - Black - Tan - White - Red - Purple - Brown - Tweed - Saddle Leather Scroll Dark Brown. Black Fender Style - Black MESA Style - Tan Wheat Orange Style - Silver/Blue Fender Style.

Marshall Black - Marshall Salt/Pepper Weave (may be extra) - White. We have Implemented the acoustic principles that cause sound to travel well. The Cabs are Stadium-ready and Professional-grade... Meant to be run hard with massive power and articulate tone. Son Set Beach cabs' overall performance is unmatched in Power, Projection, Dynamic Response and Tone....

Our build quality is superb. We make a good amp sound great... A great amp becomes simply fantastic through our speaker cabs. ASSEMBLED WITH Reliable DADO JOINTS and "Reinforced". TO REALLY GET A HIGH QUALITY SOUND AND PERFORMANCE.

IT IS WRAPPED IN Pristine Tolex , Protected by METAL CORNERS. LARGE RUBBER FEET - BLACK STEEL HANDLES. Please, Check out my other items.

I know I love these! The Picture above: THESE ARE MINE IN STUDIO "A". I TRAVEL WITH THESE ALSO.

JUST RIGHT FOR WHAT WE DEMAND. We build each Cabinet to your needs - Please Advise 8 or 16 ohms Cabs. Production time is about one to two weeks! What type of Speaker Cab would you like to see?

Tell Us at Son Set Beach Custom Shop. Bob Reynolds ATP, CFI, CFII, MEI, FE, AGI, BGI, IGI B-727, B-737, CE-500 NAMM, AES, NAB, and ASCAP Son Set Beach Productions Concord, NC USA Audio and Video Productions Mastering and Sound Reinforcement Services Pro Audio and Video Sales and Service We are honored to represent these products to our friends!

ADK Microphones - USA Amphenol - USA & AU Creation Audio Labs - USA Eventide & Eventide Stompboxes - USA. Jensen Loud Speakers - Italy Los Cabos Drumsticks - Canada Primeacoustic - Canada Radial Engineering / Tonebone - Canada Red Witch - New Zealand, North Island Son Set Beach Custom Shop Audio Cables & Speaker Cabs - USA TNC Microphones - So Cal T-Rex - Denmark. H ey Guys, Here is a good long answer to Ohms and Speakers Wiring. E (Voltage) and P (Wattage) use their RMS values. Many people ask me about changing around an amplifiers speaker wiring - either by adding more speakers or connecting them in different ways.

A lot of things happen when speaker loading changes, and if you know how Ohms Law works, it will simplify your design efforts quite a bit. I always refer to the documentation that came with any amplifier, especially as it pertains to loading/speaker Impedances. What does Ohms Law help us do?

Often we want to know how much power something has, or it will have when we have reconfigured it. If we know at least 2 things (any of Watts, Amps, Ohms or Volts), we can figure out the other 2 things. The Ohms Law chart has a center ring containing 4 items (P, I, R and E) and then an outer ring that contains equations that relate to finding out the values of the inner 4 items. This chart is color coded to simplify its use - all the like colors work together. Our focus will be on using this for working out things that musicians care about, and nothing very esoteric, so I'll avoid any details that really are not important to our needs.

Ohms Law operates assuming a perfect world - the issue is that nothing is truly perfect and Ohms Law does not account for losses or design limitations that we may not be totally aware of. We can, however, use it to create some generalizations that tell us a whole lot about the cause and effects of our power usage. How do I figure out how much power is going to my speakers? Why is it not louder when I add more speakers (it often isn't)? If your amplifier is rated at 100 watts at 8 ohms, we can solve for E (voltage) by looking at the Blue area and find an equation that uses both P (watts) and R (ohms) - We see that to get this voltage level, we have to multiply P x R, and then take the Square Root of that value.

P (Watts) = 100 R (Ohms) = 8 P x R = 800 The Square Root of 800 is approx. 28.3 So, with an 8 Ohm load at 100 Watts, the speaker will see up to 28.3 Volts (E = Volts). Now, if we want to add another 8 Ohm speaker in parallel, that would change our impedance to 4 Ohms (2 8 Ohm Speakers in parallel = a 4 ohm Load), what would the power to the speakers become? For this, we needed to know the voltage that we had for 100 Watts at 8 Ohms. Because the power supply in the Power amp is limited to how much voltage it can give us.

We know that this value from working out the above. To find out our wattage change, we look at the P (Power) inner circle, and the RED equations. R (Ohms) = 4 E (Volts) = 28.3 E squared / R will tell us what we want 28.3 squared is approximately 800 800 divided by 4 = 200 So, if we increase the load of the amplifier from 8 ohms to 4 ohms, we should see more power, and in this case, its 200 Watts. As long as the power supply can provide 200 watts, we will have doubled the available power.

What happens if I put the 8 Ohm speakers in series, effectively giving me a 16 Ohm load? The equation to use is the same, we simply plug in a different value for R. R (Ohms) = 16 E (Volts) = 28.3 E squared x R will tell us what we want 28.3 squared is approximately 800 800 divided by 16 = 50 So, if we reduce the load of the amplifier from 8 ohms to 16 ohms, we should see less power, and in this case, it is 50 Watts. If the power supply can provide 100 watts, it can easily handle 50 watts and we have halved the available power. There is an effect here that is not obvious until you look at the numbers.

Running things in parallel and using the lowest impedance load possible gives you the most power. In the case of running 2 8 Ohm speakers in parallel - you'll see in our example that each gets to split the 200 Watts between them - in this case, each speaker sees 100 Watts, which is the same Power that the individual 8 Ohm speaker saw when it was the only load on the system. In the case of running things in series, a more dramatic change occurred.

First, the available power dropped by 50%. Second, the available power that is split between the speakers is 1/2 of the available power, and in our example, these speakers now only see 25 watts each. Thats 1/4 the amount of power that the individual speaker had if run by itself at 8 ohms or when 2 are run in parallel giving a 4 ohm load. All this implies that if we simply keep putting more and more speakers in parallel, we get more power. This is true until we hit the limit of the Amplifiers internal Power Supply - the current (I) that it can give us, or the current (I) that the Power Amp output stage is limited to.

Heat plays a big part in this - when anything gets hot, some of the power that was supposed to drive the speakers is lost. The hotter it gets, the bigger the losses. Too much heat and the Audio Output stage fails often this occurs quickly and catastrophically. The most common failure mode I run into seems to favor dead shorts in the output Power Transistors, which dumps raw voltage into the speakers, and frequently burns up the voice coils in a matter of seconds.

These are strong arguments for not placing too high (lower impedance) of a load on any power amp. Always refer to the documentation that came with the power amp to see what Impedance is recommended. 8 ohm support is common. 4 ohm is also common, but not as common as 8 ohm. 2 ohm is rarely supported, however some amplifiers can handle it (please check before trying it).

How do I know how much power my equipment is using. This can be critical when you are dragging out extension cords to hook up all your gear with. You will need to avoid drawing more power than is available.

If you know the Power (Watts) ratings of all the gear you want to hook up and what the E (Voltage) is, then you can estimate I (Current) draw. In the USA, most homes are wired for 15 amps per circuit. Some power outlets are good for 20 amps, but its not good to assume you have more than 15 amps available. Most often you end up sharing your power source with other things, such as lighting or kitchen devices. Because you don't know whats out there competing with your gear, its usually not a good idea to draw more than 10 amps - this allows for 5 amps to be used by anything already connected up to the same power source. Looking at the Ohms Law chart, you can see that if you add up the Wattages (P) of all the devices you plan to use, and divide that by the Voltage (E), you will get the Current needed (I). It is good to know. Some More Feedback for these Cabs. I love it thanks so much. I may be interested in a bass cab soon too. Played through my orange rocker30 head. It screams rock and roll! Oh Yes we make Nice Custom 50 and 100 Watt Tube Amps.

Think - Hi Watt meets Orange Amps.. Sweet Tone fore Guitars and Bass.

Plus we match your Cabs to the Heads. The Back of our first Son Set Beach 50 Watt Tube Amplifier. This is My Twin with the Son Set Beach Extension 212 cab. Yes we have the 4x12 Cabs Out now! We keep hitting the Home Runs, Thank God!

Please Check out my other items. They sound really Good Guys! We can make pretty much.

The designs we have been commissioned to make are pretty Cool! Also, I guess our plant is making most all the Tech 21 & Poly Tone cabs now.

Check out my other items. Most recently I have a new 2x12 Extension Cab for the Fender Twin. It has a 2x12 Configuration and sets perfectly under the FenderTwin.

I designed it to match the front slant angle of the Fender. So, it continues the natural front angle to make the Twin Look Hugh! The back can be Semi open or closed by removing the custom SPLIT back panel. Give me a chance to make your dreams come true! Also Makes a perfect Gift for the Musician that has everything.

Or "Man, that's what I always wanted".. Subject: RE: Son Set Beach speaker cabinets.

I wanted to drop a note and let you know that I LOVE this cabinet! At first (as you remember) I was wary of the WGS speakers..

All doubt has been REMOVED!! From tone to aesthetics - this cab has become a vital piece of my sounds identity. Not having it would be paramount to not having my boogie, or my charvel..

Thanks, youre a good fella... I wish there was a way for me to tell everybody out there.

Cheers Mate - take care. My cab arrived today :D Sounds great and I'm really pleased with it. I was expecting it to be a bit larger but I'm ok with how it is, this looks very good with my Mesa head. Thanks for all your hard work, Bryce J. Hey Bob, Just got my 2x12 cab in the other day! Just wanted to let you know I love it! Great quality and it sounds awesome with my head! Btw the 3x12 sounds like a cool idea. Once you get them built I'll take a gander at them. Bob, you and your shop are without a doubt one of the Best Cabinets Makers out there today!

And with all the extra padding you guys put around the cab itself, (thank you for that) not even a scratch, mark or ding on this Beautiful cab you guys made. With the saddle leather dark brown swirl vinyl and the natural cane looking grill cloth, it looks so antique, boutique looking and what a perfect match for the 1980 Naylor amp head, its dead on! But will let you know as soon after I put it thru its paces. God Bless, JDL BigDog /Wawazatagain Recording Studios, EMI Palm Desert, CA Johnny D Lemke VP Sales, Marketing. The item "Son Set Beach NEW 4x12 Orange Speaker Cab 412 Awesome!

Unloaded Use your Speaker" is in sale since Monday, July 20, 2015. This item is in the category "Musical Instruments & Gear\Guitars & Basses\Guitar Amplifiers".

The seller is "sonsetbeach" and is located in Adelanto, California. This item can be shipped worldwide.

Son Set Beach: 4x12" Cab
Impedance (ohms): Your Speakers
Brand: SON SET BEACH