Bass Speaker Analog DI Box Direct Box Tone Monster-AMP. DI Integrated Bass

  

LY-ROCK Bass Speaker Analog DI Box Direct Box Tone Monster-AMP. DI Integrated Bass Workstation Description: It boasts DI function, speaker simulation function, microphone placement, speaker material adjustment, preamp function with three-stage equalization, audio input, headphone output, dry and wet signal output, dry and wet signal loop function and the like. This is an all-in-one bass audio workstation. Functions & Features: - The INPUT of this device is divided into active pickups and passive pickups. There is a shift below, you can switch - The OUTPUT consist of 6.35 and DI OUT wet signal output and DI PARALLEL dry signal output.

These two signals are very important when recording. The 6.35 output is the mixing ratio output (here the mixing ratio is the dry and wet signal). Below 6.35 there is a shift gear to switch through or enter our output, which is a ByPASS - PREAMP BLEND knob is a mixing ratio control of dry signal and signal entering preamp.

When the knob is adjusted to the minimum, there is a dry signal, and when the knob is adjusted to the maximum, there is a wet signal - As for the preamp part, volume, gain, mid frequency, low frequency, and high frequency are included. Three equalizers are increased by 15DB and attenuated by 15DB - 400HZ, 900HZ, 1.5KHZ available for mid frequency, but the MID FREQ knob cannot reach 0DB - CABSIM BLEND: the knob controls the mixing ratio of speaker part and the part that does not pass through speaker simulation. When the knob is set to the minimum, the signal is not simulated by speaker. After speaker simulation, the mixing ratio will reach the maximum - 4X10 VENTED, 1X15 VENTED and 8X10 VENTED for the speaker part - CAB SIZE: Adjust the material of speaker, that is, adjust the tone from transparent to warm - SPEAKER COLOR: This is the position of a microphone. The shift below this knob is to select the characteristics of the tone, from WARM, BRIGHT to MODERN - As for the loop, it is divided into dry signal and wet signal loop.

PARALLEL FX is the dry signal loop. PREAMP is the wet signal loop - More functions waiting for you to explore Package Included: - 1 x Bass DI Box Note: - It is handmade, please think twice before purchasing. Thank you for your understanding! Usually it costs about 30USD-50USD.

If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. This item is in the category "Musical Instruments\Guitars & Basses\Guitar Amplifiers". The seller is "tztrobot" and is located in this country: CN.

This item can be shipped worldwide.

1. Brand: Unbranded
2. Custom Bundle: No
3. Amplifier Type: Bass Speaker
4. Suitable For: Direct Box