Quilter Labs Interblock 45 Amplifier

  

Used savings in Very Good condition. Quilter Labs Interblock 45 Amplifier.

The Quilter InterBlock 45 is a 45-watt amp packed into a pedal size enclosure. Its size and output options make it a versatile choice for many different playing scenarios.

From the InterBlock 45, you can plug into a speaker cabinet, straight into a recording interface or PA system, or use the headphone jack for low-volume practicing. The FR/CAB switch lets you choose between a full-range flat response or a guitar cabinet simulator response. It also has an onboard overdrive section, a three-band EQ, and an effects loop, with the option of changing the EQ voice to vintage mode. Powerful: The InterBlock 45 delivers up to 45 watts power for your cabinet.

Enough power to give your pedals, your modeler, or anything that needs to be heard enough power and life for a serious gig. Find yourself on a stage where amps are not allowed? Plug in your InterBlock 45, and select the Balanced Line Output, then choose FR or cab sim to give your PA the same luscious life and tone that you give your speakers. Available FR or Cab simulated mode to coax the most life out of your instrument and into your DAW.

Love your outboard effects pedals and want them warmed up before the recording? Put them in the onboard FX loop and add your sound to your recordings. This is the answer when you need to power your modeling rig. Switch from Cab Sim to FR mode for stiff output that gets the most from your modeling speaker sim. With up to 45 watts onboard power and an FX loop, the InterBlock 45 integrates perfectly with your pedalboard turning your pedalboard into a go anywhere, do anything, unstoppable force of nature. 45 Watts 4 Ohms: 33 Watts 8 Ohms: 17 Watts 16 Ohms.

24 Volt Power Supply (Included). H 5" (12.7cm) x W 4" (10.16cm) x D 1.75 (4.45cm). Outer carton: 10.75" (27.3cm) x 6.25" (15.86cm) x 2.5 (6.35cm).

Welcome to the INTERBLOCK 45: Micro size, big feature package. The InterBlock 45 provides all the key requirements for coupling an electric guitar or other electronic instrument to a PA or recording console, and also contains a built-in amp with enough power for practice or small gigs. It combines a full-service guitar preamp, overdrive section, effects loop, cabinet simulator, headphone driver, and 45-watt power amp in a single pedal-size enclosure. As the name suggests, it provides a complete interface between your instrument, your pedals, your DAW, your PA system, or a stand-alone loudspeaker, with lots of flexibility to handle whatever you may come across in your efforts as a performing artist. In spite of its diminutive size, this little powerhouse packs a potent punch capable of driving a serious stageworthy rig. The high impedance INPUT accepts normal guitar cables. The GAIN control ranges from clean to overdrive. The three band EQ adjusts LOW, MID, and HIGH frequencies, with two selectable EQ VOICE modes. FULLQ starts from a flat response with EQ at 50%, and the VINTAGE mode emulates the "Fender Style" tone stack. A full featured FX LOOP includes a secret "audio input" feature allowing an auxiliary music source to be "injected" into the FX RETURN, which further expands the capabilities of the InterBlock 45. The MASTER control adjusts the overdrive threshold from 0 to 45 watts offering clean headroom and/or rich overdrive at will. From the MASTER CONTROL, dual signal paths lead to the BAL LINE OUT/HEAPHONE jack, and the SPEAKER OUTPUT jack, which drives any normal speaker, and is stable with no speaker connected.